Plan the permit route before approving a water-heater replacement or conversion. Costa Mesa publishes a limited residential tank-water-heater Insta-Permit route. Newport Beach's published water-heater checklist states that a permit is required for replacement or repair. The exact process depends on the address and proposed work; the two cities' procedures are not interchangeable.
This guide helps you decide which Building Division questions and documents belong in your project scope. Confirm current eligibility, forms, and inspection requirements with the applicable city. Older checklists can identify issues to discuss without establishing the code requirements in force today.
Describe the whole project first
Before contacting the city or comparing installation proposals, collect the address, existing heater type, proposed heater type, equipment location, and whether capacity or energy source will change. Include any proposed re-piping, gas, electrical, venting, or other alterations.
“Replace the water heater” can describe a straightforward change-out or a broader conversion. If the description omits associated work, the permit discussion may begin with the wrong assumptions. For a shared or commercial building, state that use clearly rather than selecting a residential route by default.
Ask the contractor to identify who will apply, what documents they will submit, whether fees are included in the proposal, and how completion will be recorded. Do not assume permit issuance, installation, and final approval are the same event.
Costa Mesa: start with the published tank-replacement route
The City's Insta-Permit page describes a limited Residential Water Heater permit for change-out or relocation of existing tank water heaters. It excludes other improvements, including re-piping and conversion to tankless. The City requires its standard water-heater plans for that route.
For a like-for-like tank replacement, ask whether the project qualifies. The web page describes a residential dwelling unit, while the September 2024 standard plan says detached single-family residences. That difference makes confirmation worthwhile for duplexes, multifamily properties, and other arrangements. Do not assume relocation qualifies simply because it appears in the web description; confirm the location and full scope.
The page also says the water heater must not be visible to the public. Describe the proposed location to the City rather than trying to interpret eligibility from a photo alone.
The permit listing provides contractor and owner-builder water-heater options. Selecting an owner-builder option is not a technical installation recommendation. Ask the Building Division which application and declarations fit who is actually responsible for the project.
Costa Mesa: use TESSA and the required documents
Costa Mesa directs Insta-Permit applications through TESSA, its electronic self-service system. The published sequence includes completing the standard plan, providing project and applicant details, uploading documents, signing the declarations, submitting the application, and paying the City's invoice.
The standard plan asks for existing and proposed capacity, heating method, and manufacturer performance and size information. Gather the selected model's documentation rather than substituting a generic product advertisement.
The standard plan identifies a final plumbing inspection and directs inspection booking and supporting-document uploads through TESSA. Ask which inspection steps and attachments apply to your issued permit. Avoid relying on an old telephone instruction when the permit record gives current directions.
Tankless conversion and combined re-piping are outside the water-heater Insta-Permit's limited scope. Contact Building Safety about the appropriate route for the entire project. A separately listed re-pipe permit does not mean the two projects can be combined under the water-heater form.
Newport Beach: confirm the water-heater application category
Newport Beach's Online Permitting page points applicants to its online system and explains that Express Permits are for simple single-scope projects. It says they are not for remodels or projects needing multiple permits and plan review.
The page does not explicitly identify water-heater replacement as an Express Permit category. Ask the Building Division at (949) 644-3200 which category applies to your exact project. Do not assume that a replacement qualifies just because other simple projects are listed.
The City's published water-heater checklist says a permit is required for replacement or repair. The file dates to 2016 and includes older code references. Use the current City process to confirm the permit scope; this guide does not reproduce those section numbers as present-day requirements.
For a tankless conversion, changed fuel source, relocation, or associated utility work, describe all changes together. Ask whether plan review, additional trade permits, or different documentation is required.
Newport Beach: ask how final approval will happen
The City has published a voluntary contractor/property-owner self-certification form for like-for-like water-heater installations in the same location, size, and type. The form is dated January 2020 and refers to the 2019 Plumbing Code.
That establishes a published program, not its current eligibility or availability. Ask whether self-certification is still offered, which current form applies, and whether the City will require an inspection for this installation. Do not assume KCB participates or that the form eliminates every possible City inspection.
Ask for the applicable completion record after work is done. Keep the permit number, final approval or inspection outcome, equipment identification, and installation documents together. A submitted application or paid invoice alone should not be described as final project approval.
Keep the permit and installation decisions connected
Both cities' documents discuss matters such as equipment access, safety devices, connections, and seismic restraint. Those are reasons to have the installer evaluate the complete installation. They are not a homeowner construction checklist or a substitute for the selected manufacturer's instructions and current City requirements.
If the equipment changes during quoting, revisit the permit description before proceeding. Ask what remains unresolved and who will obtain the answer. Avoid a proposal that simply says “permit if needed” without assigning responsibility for confirming it.
For local service, see KCB's Costa Mesa water-heater service, Newport Beach water-heater service, and water-heater replacement and installation. KCB Plumbing serves Orange County from Costa Mesa Monday–Friday, 7 AM–6 PM, and Saturday–Sunday, 8 AM–5 PM. Call (714) 894-6520 to discuss scope and availability. An online request is not emergency dispatch.
Last updated: October 2, 2026
About the Author
KCB Plumbing
Plumbing guidance from KCB Plumbing, based in Costa Mesa and serving Orange County since 1998.
Have a plumbing question? Call KCB Plumbing at (714) 894-6520 (Monday–Friday, 7:00 AM – 6:00 PM; Saturday–Sunday, 8:00 AM – 5:00 PM).