After a power outage, compare your softener’s displayed time with the actual time, then check your model’s manual. As the Whirlpool WHES30/WHES33 manual illustrates, a flashing time display does not by itself mean every setting was erased; follow the model manual for any clock correction and leave other programming alone.
Begin with the equipment identity and what the screen actually shows. Write down the time power returned, the displayed time and any message or error code. This gives you a clear question for the manufacturer or service professional without starting an unnecessary reset or regeneration.
Identify the control before looking for reset instructions
Find the brand, model and available installation paperwork without opening the control enclosure. If the paperwork names a separate valve or controller, keep that name with the softener model. Photograph a safely visible equipment label and the display so support can confirm the correct instructions.
Avoid choosing a manual from a picture of a similar tank. Ask the manufacturer or installer to confirm which document applies when the label is unclear. Keep the PDF revision or document number with your records, rather than saving only a search result for a generic clock-reset question. Keep the model manual, confirmed equipment identity and service notes together. Ask the technician to record which settings changed.
For a concrete example, Whirlpool's WHES30/WHES33 manual, page 14, separates present time from hardness and recharge-time settings after an outage.
Compare actual time with displayed time
Record the real local time next to the softener's displayed time, including AM or PM if shown. Note whether the screen is blank, flashing the time, showing a recharge message or displaying an error. Keep these observations separate; avoid calling every flashing screen a failed clock.
The Whirlpool manual says the cited models retain settings for several hours during a loss of power. After power returns, it calls for correcting present time if the display flashes, while hardness and recharge time remain retained. It also explains that an incorrect clock can shift regeneration to the wrong time of day.
Follow the model manual if a correction is needed. Do not substitute instructions for a different control, enter an installer menu or change the water-hardness setting to make the screen stop flashing. If you cannot confidently identify the display or applicable instructions, ask for help with those two items first.
Stored settings and ongoing operation are separate questions
Pentair's 5600SXT system manual, under control operation during a power failure on page 9, describes stored configuration and a control that stops monitoring water use while power is absent. If regeneration was interrupted, it describes resuming that cycle after power returns.
These are model-specific behaviors. Ask support what your control retains, what it stops doing during an outage and what happens to an interrupted cycle. Do not assume that memory backup means the equipment continues all its powered functions, or that restoring power requires starting a fresh cycle yourself.
The Pentair document gives differing time-retention descriptions in its electrical-connection and control-operation sections. For that reason, use it to frame questions about the covered control rather than promising one backup duration for every 5600SXT installation. Ask the supplier to resolve any inconsistent instructions for your equipment.
Keep clock correction separate from regeneration programming
Use our metered versus timer softener guide if you need the broader explanation of how regeneration is triggered. Here the immediate question is narrower: does the displayed time match actual time after power returns?
If regeneration is now noticed during breakfast or another busy period, record both the real time and the screen time. Include whether anyone changed programming after the outage. Ask the service professional to check the clock and existing configuration before proposing a different schedule or new equipment.
Do not change hardness, capacity, salt dose or cycle frequency as an outage experiment. Keep any prior installation settings available for the person reviewing the system. If those records are missing, state that plainly instead of guessing what the original values must have been.
If the display remains blank or faults recur
A blank screen needs a different conversation from a readable clock showing the wrong hour. Report whether household power has returned, whether the screen ever came back and whether an error appeared. Leave enclosure access, wiring inspection and electrical testing to the appropriate professional.
If water has reached electrical equipment or the surrounding area, treat safety as a separate issue. The CDC's electrical-hazard guidance says not to enter standing water to reach the main switch or operate electrical equipment while standing in water. Arrange qualified help rather than approaching wet controls.
For a recurring clock problem, keep dates and display photographs from each occurrence. Tell support whether the problem followed a documented outage or happened while other household equipment appeared powered. Ask what needs verification before accepting a control replacement, battery modification or backup-power recommendation.
If the treatment layout is unclear, our filter and softener order guide addresses that separate planning question. Avoid using this clock check as a reason to rearrange filtration stages or operate unfamiliar plumbing controls.
Common questions
Does flashing time mean all settings are gone?
Not necessarily. The cited Whirlpool manual distinguishes retained hardness and recharge-time settings from present time. Confirm what your own model retains before changing anything.
Should I manually regenerate after every outage?
Do not make that a universal response. Follow the model manual or ask support about the interrupted cycle and current condition before initiating extra operation.
What if the softener starts operating at an unexpected hour?
Record the actual time, displayed time and screen message. Ask for a clock and configuration review; an unexpected hour alone does not establish a failed valve.
Discuss softener maintenance with KCB
Call KCB Plumbing at (714) 894-6520 Monday–Friday, 7 AM–6 PM, and Saturday–Sunday, 8 AM–5 PM. Share the softener model, outage timeline and display observations for your Orange County property.
View Service DetailsLast updated: November 18, 2026
About the Author
KCB Plumbing
Plumbing guidance from KCB Plumbing, based in Costa Mesa and serving Orange County since 1998.
Have a plumbing question? Call KCB Plumbing at (714) 894-6520 (Monday–Friday, 7:00 AM – 6:00 PM; Saturday–Sunday, 8:00 AM – 5:00 PM).