Skip to main content
Lic #604044
(714) 894-6520
← All Articles

Water Heaters

How often should you flush a tankless water heater?

By KCB PlumbingOctober 2, 2026

Use the maintenance instructions for your exact tankless model, the water supplied to it, and its service history to set a flushing interval. There is no single schedule that applies to every tankless water heater. An annual inspection, a calendar reminder, and a scale-related fault are also different reasons for service.

The practical decision is which documented recommendation applies to your heater now. Before scheduling a flush, ask the technician to identify the model-specific instructions and explain how water conditions and any treatment equipment affect them.

Start with identification and water information

Photograph an accessible manufacturer label without opening the cabinet or disturbing connections. Record the model and serial number, the last service date, what that service included, and any displayed message. Unknown history should stay marked unknown.

Water hardness is relevant because the manuals below connect mineral buildup with maintenance. Your city name does not establish the hardness entering your heater. Identify your water supplier and share any reliable household water-test and treatment records. A supplier-wide report and a measurement after treatment can describe different water.

Ask whether the technician needs a current measurement, what units it uses, and where it was taken. The examples below use the manuals' milligrams-per-liter figures; do not substitute a guessed Orange County average.

Rinnai RE/VE: inspection and reminder settings differ

The Rinnai RE/VE installation and operation manual, document 100000722(02), December 2021, requires annual inspection by a qualified professional. It describes flushing separately and says water conditions may require more frequent service.

For this model family, the Service Soon reminder can be disabled or set to six months, one year, or two years. The manual says the installer selects it based on water conditions and other factors. Those settings are reminder options, not proof that every Rinnai may safely wait two years for flushing.

The manual distinguishes the time-based SS reminder from the LC indication of scale buildup. If either appears, share the exact message with the service provider. Do not clear it to postpone the discussion.

Rinnai's general flushing web guidance recommends at least annual flushing. Ask the technician to reconcile that broad advice with the applicable model manual and actual installation. A brand-wide webpage does not identify the setting or service needs of your particular heater.

Navien NPE-A2/S2: read the hardness table and footnote

The Navien NPE-A2/S2 installation manual, version 2.0, January 2026, gives treatment and flushing recommendations on page 15.

Its soft-water band, 0–60 mg/L, lists no scheduled flush. Its moderately hard band, 61–120 mg/L, lists annual flushing. Higher bands list annual flushing for residential use and twice-yearly flushing for commercial use. The table's footnote says flushing is recommended when a treatment device is not installed.

Treatment recommendations also change across the bands; this is not permission to disregard the rest of the table. If treatment is installed, ask whether it is appropriate, operating correctly, and consistent with the instructions. Do not infer that a device of any kind eliminates all maintenance.

The companion user's manual identifies a flushing/service alarm and directs the owner to the installer. The installation table does not turn that alarm into a complete diagnosis. An unexpected message or changed performance deserves assessment even if the planned visit is months away.

Noritz NRC111DV: different bands, separate scale indication

The Noritz NRC111DV installation manual, revision January 2017, uses different hardness bands on page 26. It must not be applied to every Noritz model.

For residential use, its soft and slightly hard bands through 51 mg/L list no calendar flushing. From its moderately hard band, 51–120 mg/L, upward, the table lists annual flushing or service when the scale indication flashes. The footnote says flushing is required if a treatment device is not installed. Treatment selection has its own conditions.

The printed bands share some endpoints. If your measurement sits at a boundary, ask the professional to interpret the exact table rather than rounding it to justify a longer interval. Confirm the manual revision that applies to your equipment before using this older example.

Noritz describes the flushing procedure as work for a qualified service professional. This guide explains how to choose a service schedule; it does not provide pump, chemical, valve, or electrical instructions.

Distinguish maintenance from diagnosis

Reduced performance, inconsistent temperature, or an error display does not prove that scale is the only cause. Record what changed, which fixtures are affected, and whether the symptom occurs during overlapping use. Give the technician the observation rather than ordering a flush as the assumed cure.

Ask whether the visit covers scheduled maintenance, diagnosis, or both. Confirm which manufacturer checks are included, whether service access needs work, and how any additional recommendation will be explained before it proceeds.

A maintenance invoice should identify the appliance, work completed, any concerns left unresolved, and the recommended next review. Ask for the manual section or water-condition basis behind that date. A clear record is more useful than an unexplained annual reminder copied from the internet.

Make the next appointment a documented decision

If you have no reliable history, arrange an assessment to establish a baseline. If there is an earlier scale message or significant performance change, contact a qualified service provider rather than waiting for a calendar date. If treatment or water supply changes, request a review of the prior recommendation.

For service, use KCB's tankless repair and flushing page. For broader equipment questions, see water-heater services and the plumber-visit preparation checklist. KCB Plumbing serves Orange County from Costa Mesa; call (714) 894-6520 Monday–Friday, 7 AM–6 PM, and Saturday–Sunday, 8 AM–5 PM to confirm availability. Online requests are not emergency dispatch.

Last updated: October 2, 2026

About the Author

KCB Plumbing

Plumbing guidance from KCB Plumbing, based in Costa Mesa and serving Orange County since 1998.

Have a plumbing question? Call KCB Plumbing at (714) 894-6520 (Monday–Friday, 7:00 AM – 6:00 PM; Saturday–Sunday, 8:00 AM – 5:00 PM).

Related KCB Resources

Need a Trusted Orange County Plumber?

Free over-the-phone estimates. Flat-rate, upfront pricing. Lic. #604044, fully insured and bonded.

Call (714) 894-6520

Monday–Friday, 7:00 AM – 6:00 PM; Saturday–Sunday, 8:00 AM – 5:00 PM